Operating Guide

OM26720C.2 ™ & © Char-Griller / A&J Mfg. 8

Step 8

To install ASH PAN, hold ASH PAN up against the bottom of the GRILL BODY from the front

with the center pin on the inside. Slide the ASH PAN back and use clips on the sides of the

grill to snap into position as shown.

Step 9

Position O-Ring on bottom of damper by rolling it up to the bead. With O-Ring in position,

install DAMPER with two (2) 1/2 inch bolts from inside the HOOD. Damper coating will

scratch with use. This does not affect the function or performance of the damper. Next,

install THERMOMETER GASKET, THERMOMETER and BEZEL with wing nut, as shown be-

low. Make sure to calibrate the thermometer first, see page 11.

Damper

Hex Bolt

O-Ring

Bezel

Thermometer

Gasket