Installation Guide

3070_OM_A.2

HARDWARE AND TOOLS NEEDED

Assembly: Requires 2 people. Get another person to help. Tools Needed: Pliers,

Phillips Head Screwdriver and a 7/16” Nut Driver.

NOTE: Do Not tighten any bolts unless instructed to do so. Tightening too soon

may prohibit parts from tting together. All Hex Nuts should be on the inside of the

grill unless stated otherwise. Unpack all contents in a well cleared and padded

area.

Estimated Assembly Time: 45 minutes

Hardware Pack:

¼-20 x 3/4” HEX BOLT .......................... 1 PCS

¼-20 x 3/4” HEX BOLT WITH THREAD LOCKING

COMPOUND ......................................... 4 PCS

¼-20 x ½” HEX BOLT ............................ 64 PCS

¼” FLAT WASHER ................................ 2 PCS

¼”-20 HEX NUT .................................... 15 PCS

¼” LOCK WASHER .............................. 49 PCS

COTTER PIN ........................................ 2 PCS

3/16” SHEET METAL SCREW .............. 3 PCS

1/8” MACHINE SCREW ........................ 2 PCS

#10-24 x 2/5” SCREW ........................... 6 PCS

UTENSIL HOOK ................................... 3 PCS

B-4