Instructions / Assembly

OM3072 E.1 ™ & © Char-Griller / A&J Manufacturing 17

Step 12: Install the Burners into the Grill Body by inserting the IGNITER WIRES and

Burners through the open holes at the front of the Grill Body from inside of the Grill

Body, see figure 12A. (NOTE: IGNITER MUST BE ON BOTTOM SIDE OF BURNER). The

BURNER with the longer wire goes on the right side of the GRILL BODY. Making sure

that the Valve goes inside each burner, see figure 12B. Then secure the Burners to

the Grill Body with the screws provided, see figure 12C.

Figure 12A

Figure 12B

Figure 12C

Valve

Burner

Screw

Burner

Igniter with Wire