MEAT GRINDER For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed, including the following. READ ALL INSTRUCTIONS. 1. To protect against risk of electrical shock, do not put appliance in water or other liquid. 2. Close supervision is necessary when any appliance is used by or near children. This appliance is not recommended for use by children. 3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
17. Never use abrasive cleaning agents or abrasive cloths when cleaning the unit. 18. Do not use fingers to scrape food away from cutting blade while appliance is in operation. Cut type injury may result. 19. Only use the unit when completely assembled. 20. Do not leave the appliance unattended while it is running. 21. Before using for the first time, remove all packaging and thoroughly wash all parts with hot soapy water. 22. This appliance has a polarized plug (one blade is wider than the other).
L-Grinder Head Clamp Knob O-Power Switch N-Reverse Switch Sausage Filling A- Food Pusher H- Sausage Filling Funnel (short) B- Die-Cast Hopper K- Auger C-Grinder Head Collar M- Auger Head D-Sausage Attachment (large) P- Plastic Washer G- Auger Positioner Q- Medal Washer Meat Grinding A -Food Pusher J- Cutting Blade B- Die-Cast Hopper K- Auger C- Grinder Head Collar M- Auger Head E-Cutting Plate (coarse) P- Plastic Washer F- Cutting Plate (fine) Q- Metal Washer I- Cutting Plate (medium not included-can be p
HOW TO USE YOUR CHARD #8 GRINDER 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. ASSEMBLY Before each use wash all parts with warm soapy water before assembly. Ensure grinder is unplugged before performing any assembly. Loosen auger head clamp knob (L) and install auger head (M) into grinder body until completely engaged with drive mechanism. While holding grinder head with one hand, turn auger head clamp knob clockwise until tight. Insert auger into auger head and align spindle with internal gear drive.
HOW TO USE TIP: Partially frozen food grinds much more efficiently than fully thawed food. We recommend that frozen food be partially thawed before grinding or thawed food be partially frozen prior to grinding. Never attempt to grind fully frozen food. 1. After unit is fully assembled per instructions above, confirm that power switch is in the OFF position. 2. Insert plug into wall outlet. 3. Confirm grinder is on stable work surface. 4. Place a wide shallow bowl or plate directly below the grinder head. 5.
CUTTING PLATES Fine Cutting Plate - Great for spreads, pates, baby food, and hamburgers. Medium Cutting Plate- Great for ground meat used in soups, or for relishes. (not included-can be purchased separately) Coarse Cutting Plate - Great for ground meat used in chili, or for vegetables CUTTING PLATES ARE NOT DISHWASHER SAFE. PLEASE HAND-WASH ONLY! HELPFUL HINTS ● Grinding stale bread pieces may help remove food residue left in the appliance after use.
TO MAKE SAUSAGES The sausage attachments allow you to blend meat and spices for homemade sausages. 1. Make sure the unit is turned off and unplugged. Remove screw ring, cutting plate and cutting blade 2. Insert sausage making ring into feed screw. Make sure notch on sausage making ring aligns with notch in feed screw. 3. Put the desired sausage attachment to screw ring and screw onto the grinder/feeder head. 4.
● Never immerse power unit in water or other liquid. ● Wash all parts except motor unit by hand in hot soapy water, using care when handling the sharp blades. ● Rinse these parts with clear hot water, then dry. REMOVABLE PARTS ARE NOT DISHWASHER SAFE! ● Wipe motor unit with a damp cloth. Do not use harsh or abrasive cleaners. ● Cutting blade and cutting plates should be coated with cooking oil after washing and then wrapped in grease-proof paper to keep them lubricated and rust-free.
One-Year Limited Warranty Your Chard™ International LLC product is warranted for one year from date of purchase against all defects in material and workmanship. Should your product prove defective within one year from date of purchase or receipt, return the unit, freight prepaid, along with an explanation of the claim. Please send to: Chard International LLC PO Box 444, Two Rivers, WI 54241-0444. (Please package your product carefully in its original box and packing material to avoid damage in transit.
