Use and Care Instructions Ice Maker Durable, Portable, Convenient • Choose from three cube sizes: small, medium, or large • Built in reservoir drain • Includes a convenient ice scoop • Choisissez entre trois tailles de cubes: petits, moyens ou grands • Drain de réservoir intégré • Comprend une cuillère à glace pratique
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS…………………………………………………2 PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS…………………………………………………………………….3 GETTING TO KNOW YOUR UNIT… ………………………………………………………..4 OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER………………….…………………………………………...5 CONNECTING YOUR ICE MAKER……………….……….…………………………………...5 CLEANING AND MAINTAINING YOUR ICE MAKER….………………………………………..5 USING YOUR ICE MAKER START TO MAKE THE ICE-CUBE…………………………………………………….….
IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages manual and your appliance. Always read and obey all safety massages. This is the safety alert symbol: ! All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”. ! DANGER ! WARNING These words mean: You can be killed or seriously injured if you don’t immediate follow instructions.
PREPARING YOUR ICE MAKER FOR USE When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Do not operate this，or any other appliance with a damaged cord. Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
GETTING TO KNOW YOUR UNIT 1. Cover: With a transparent window to allow interior visibility. 2. Ice scoop. 3. Ice shovel. 4. Control Panel: Easy to use, visible functions and LCD display setting. A. LCD display window. 1: Current Clock Time 2: No water diplay,When flashing, means no water in the unit, need to pour water in. 3. Ice-full display, when it display, means the ice basket is full of ice-cube. 4.
UNPACKING YOUR ICE MAKER OPERATING PROCEDURES & MAINTENANCE 1. Remove the exterior and interior packaging. Check that ice basket and ice scoop is included. If any parts are missing, please contact our customer service. 2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it 3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface.
USING YOUR ICE MAKER 1. Open the cover, remove the ice basket and pour water into water reservoir. Keep water level below the level mark. 2. Press “ON/OFF” button on the control panel to turn on the unit to begin the ice making cycle. 3. Select the size of the ice cube by pressing the “Select” button.
Press the TIMER button first, the default “3.0H” delay time will flash in LCD display window, then press the SELECT button to select your desired delay time. Each press SELECT button one time, the flashing delay time will increase 0.5 hour, and if you always press the SELECT button for mor than 3 seconds, the delay time will chang very quickly. Then after 5 seconds flashing, the delay time digit will change from flashing to always displaying, means the timer program has been set.
TROUBLESHOOTING Ice making cycle is normal but no ice is made. Water temperature in inner tank is too low. Change the water in the inner Tank. Temperature of water is better set between 45℉-90℉ . Ambient temperature or water temperature in inner tank is too high. Please run the ice maker below 90℉ and pour colder water into tank. Refrigerant liquid leakage. Verify by a qualified technician. Pipe in the cooling system is blocked. Verify by a qualified technician.
CIRCUIT DIAGRAM Start Lelay ELECTRICAL DIAGRAM FOR ICE-MAKER Motor For Ice shovel Solenoid Valve COMPRESSOR DC Water Pump DC Fan Motor Overload Protector VALVE MOTOR TRANSFORMER COMP AC- N AC- L Relay Relay Relay OPERATION PCB WATER DETECTING SWITCH MICRO SWITCH MICRO SWITCH YJP ON/ OFF SET CLOCK TIMER +PUMP- -FAN+ SENSOR FOR ICE FULL DETECTING MAIN CONTROL PCB SENSOR FOR CONTROLING FAN MOTOR
