Installation Guide

HOW TO SET THE TIMER

CLEANING REMINDER

HOW TO SET THE CLOCK & DISPLAY PANEL

1. Press the TIMER button ﬁrst - the default “3.0H” delay time will ﬂash in LCD display window.

2. Then press the SELECT button to select your desired delay time. Each press of the SELECT button

will increase the ﬂashing delay time by 0.5 hour. If you HOLD the SELECT button for more than 3

seconds, the delay time will increase very quickly.

3. After 5 seconds, the delay time digit will change from ﬂashing to always displaying. This means the

timer program has been set.

HOW TO CANCEL THE TIMER

When the unit has been set with the timer or during the timer setting process, press the

TIMER button, then the delay time digit will disappear. This means the timer set has been cancelled.

This unit is supplied with CLOCK dipalying function. If the displayed time is not

correct, you can adjust it to the correct digit through the CLOCK and SELECT

button.

First press the CLOCK button once, the digit meaning hour will

start to ﬂash ﬁrst. Then you can press SELECT button to change it. Each press

will increase by 1 hour.

Press the CLOCK button again. The digit meaning minute will start to ﬂash.

Press the SELECT to change it.

Then press the CLOCK the third time to conﬁrm it. Now it displays the new

correct time.

During adjusting process, after 5 seconds ﬂashing, the digit will automatically

change to always display. This means the new time has been set.

When the symbol ﬂashes, the unit needs to be cleaned. After you have cleaned the unit, press the

TIMER button for more than 5 seconds. This symbol will disappear from the LCD display window. The

cleaning timer will reset to Zero and reaccount again.