Owner`s manual
42
Tip the carrier backwards and put it down on the handlebar.
Insert the wheel in the axle dropouts.
Close the quick-
release lever.
In order to ensure that the hub is clamped sufciently in the
axle dropouts, the quick-release lever must begin gripping as it
moves from the open to the middle position, and approaching
the closed position you should clearly feel resistance as you
tighten.
If it is too easy or too difcult to move the quick-release, tighten
or loosen the lock nut on the other side of the hub to adjust.
If you don’t feel condent operating the quick-release
skewer, please ask your specialist retailer for assistance.
warning
Always make sure that the quick-release is correctly instal-
led. An incorrectly tensioned quick-release may lead to the
front wheel coming loose, resulting in an otherwise avoidable
accident in which you and/or your passenger(s) could suffer
serious injury or death.
To correct
directional trueness
(ie. The carrier not
rolling straight):
The dropouts of the wheel arms are bolted on and their holes
are slotted. After loosening both bolts, the dropout can be
moved. This is possible on both the right-hand and the left-hand
side dropout. If the Jogging Stroller is pulling to the right, the
dropout on the right-hand side must be moved forwards, and
the one on the left-hand side backwards (or vice versa).
nOTE
Please ensure that your child does not stand on the wheel
arms when entering or leaving the carrier. If at any time you
stop, do not allow anyone to sit on the wheel arms.
3 straps are provided at the rear on the storage bag for attaching
the 16”/40cm wheel. First of all thread correctly and then pull the
top webbing strap tight. Then secure the wheel using the right
and left-hand Velcro straps.
nOTE
Always make sure, that the 16“ wheel is attached securely.
Storing the wheels arms and 16� wheel
!