User Manual

2150GR Ground Penetrating Radar
054-139 - Rev. 1
10/36
4.2 Connecting the cables
4.2.1 Connecting the battery
Fig. 4-4 – Battery and cabling support
¾ Place the battery in the battery bag and place the bag on the PVC base plate. Secure
the bag to the support with the strap provided.
¾ Connect one end of the power supply cable to the BATTERY port on the Control
Unit (1). Connect the opposite end to the white connector on the battery (2), as
shown in Fig. 4-4.
!
NOTE
The control unit continuously draws current from the battery. To prevent drain,
unplug the battery when the unit is not in use.