User Manual

2150GR Ground Penetrating Radar
054-139 - Rev. 1
16/36
5.2 Software installation and configuration
!
NOTE
The 2150GR is shipped with GPR software already installed and configured.
If it is necessary to reinstall the software, follow the steps below.
Copy the contents of the 2150GR file from the installation support into the: C:\ directory.
Create a shortcut of the 2150GR.exe file present in the C:\2150GR\ directory.
Before using the 2150GR software, you have to configure the notebook network card. To
perform this operation in Windows 2000 Professional or Windows XP Professional, follow
the steps below:
¾ Select the My Network Places icon with the right mouse button.
¾ Select the Properties button.
¾ Select the Local Area Connection (LAN) file with the right mouse button.
¾ Select the Properties command.
¾ Select Internet Protocol (TCP/IP) from the list of components (in the general menu)
with the left mouse button (see Fig. 5-1).
¾ Select the Properties command.
Fig. 5-1 – Selecting the Ethernet card (TCP/IP)