MARINE SOLUTIONS www.charlesindustries.
TABLE OF CONTENTS BATTERY CHARGERS IMC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .m3-m4 HQ Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .m3 5000 SP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .m4 2000 SP Series . . . . . . . . . . . . .
HQ BATTERY CHARGERS ABS listed and certified Marine Battery Chargers that meet USCG requirements for megayacht and workboat fleets around the world. The HQ Series offers a rugged battery charger and power supply all in one unit. Many government, military, homeland security, megayachts, and commercial marine vessels are required to meet ABS standards on all new construction over 150 gross tons and/or vessels over 90 meters. The HQ Series delivers full compliance for battery chargers.
5000 SP BATTERY CHARGERS 5000 SP Series chargers feature a battery type selector switch, allowing you to charge Lead Acid, Gel or AGM batteries. They are tested by Marine UL for safety and durability against impact, vibration, temperature and shock. 3-stage charging with temperature compensation (30 Amp and greater models) delivers the greatest charge when the battery is most able to accept it, prevents overcharging and extends battery life. Up to 3 battery banks can be simultaneously restored.
9000 SP BATTERY CHARGERS These marine UL listed chargers use self-regulating ferroresonant transformers devoid of any complicated switching circuits to charge up to three battery banks simultaneously. Built with rugged stainless steel enclosures and UL recognized, high-quality components to withstand the marine environment. Accurately charge lead-acid batteries only. Features include an easy-to-read ammeter to indicate rate of charge and ignition-protected components for safety. 12, 24 or 32VDC.
GENERAL BATTERY CHARGER INFORMATION Sizing a Battery Charger Charging Multiple Battery Banks (outputs): The size of the battery charger depends on the amp-hours of the batteries and the loads the charger must supply. The loads must also include the DC loads for which the charger must provide when in power supply mode. A simple rule of thumb when sizing your charger: Charles C-Chargers include isolation at each output.
STARTNOW™ A great day of boating is a complete success when your engine starts to take you home! There is no worse end to a boating trip than discovering a discharged battery when you are ready to call it a day. With the new StartNow from Charles Marine, you never have to worry about facing this unpleasant experience. The StartNow microprocessor allows the main battery to drain without draining the reserve battery.
BATTERY ISOLATORS All Charles Battery Isolators are ignition protected. They feature a heat chamber design, protective boots on heavy-duty 5/16” battery and alternator studs, corrosion-resistant casings, are compact and easy to install. Either leg of the Charles Battery Isolator handles the entire alternator output amperage rather than a portion of the rated load. 1-year limited warranty, made in the USA.
MULTI-STAGE REGULATORS Charles Multi-Stage Regulators are designed to control the power of the alternator output and maintain the proper battery charging voltage regardless of the engine speed. The charge effect of the alternator depends solely on the electronic three-stage regulator. These units have been designed for use with a wide variety of type-P alternators. 2-year limited manufacturer’s warranty, made in the USA.
C-POWER® SURGE SUPPRESSORS Charles has designed surge protection devices specifically for onboard marine use. These products protect valuable AC and DC systems from power surges and spikes. An EMI suppressor unit is also available to protect against DC transients created by trim tab pumps. 2-year limited manufacturer’s warranty, made in the USA.
DC-to-AC POWER INVERTERS Charles Power Inverters convert 12 and 24 volt DC battery power into 120/240 60Hz AC power that can be used to operate onboard equipment and appliances. Now, regardless of the size of the vessel, it is possible to run a notebook computer, microwave, blender, television or other desired equipment. Inverters can also be a viable alternative to turning on a generator. They produce less noise and no fumes, and require less power to run. True Sinewave vs.
POWER INVERTER / BATTERY CHARGER COMBO Charles inverter/battery charger combinations save space by sharing electronics and transformers. While connected to the generator or shore-power, the inverter/ chargers recharge the batteries quickly and efficiently. Status LEDs indicate the batteries’ state of charge. The unit automatically controls the charger or inverter functions. While shore power is connected, the battery charger is turned on.
SMART-Y™ ADAPTERS Charles’ patented Smart-Y Adapters enable boaters to reliably double available shore voltage. Designed for long life, the Smart-Y eliminates the potential for shock hazard when one leg is disconnected; both legs must be plugged into the power source before current will flow. Smart-Y products will provide years of trouble-free use in the marine environment. Manufacturer’s limited lifetime warranty, made in the USA.
SHORE POWER CABLING SOLUTIONS C-Cable® Hull Inlets E LIFETIM Y! NT A R WAR MADE IN THE C-Cable® Accessories E LIFETIM Y! NT A R WAR 30 Amp 125 Volt I30MPF I30 I30MPF I30MP I30MP-AC I30MAC 30amp-125V inlet, interior switch replacement 30amp-125V inlet, white polycarbonate w/flip cover 30amp-125V inlet, white polycarbonate, threaded cover 30amp-125V inlet, white poly.
SHORE POWER CABLING SOLUTIONS IME C-Cable® Cord-Sets LWIFAETRRANTY! 30M1 P30 R30 COUP30B ENDCAPB R30 1530PCM35L 15 to 30amp-125V, 35’ molded cable (yellow only) 30PCM25L 30amp-125V, 25’ molded cable 30PCM35L 30amp-125V, 35’ molded cable 30PCM50L 30amp-125V, 50’ molded cable 30PCM75L 30amp-125V, 75’ molded cable Standard cord-sets are yellow in color. Cord-sets are available in white. To order in white, add “W” to end of the part number (i.e. 30PCM25LW).
ISOLATION TRANSFORMERS Isolation transformers isolate the boat from shore, protecting onboard electrical systems and electronics from potential shore-side hazards. They also diminish the potential for water shock hazards and eliminate the need for galvanic isolators and polarity alarms. Isolation transformers eliminate galvanic current without electronic components, whereas galvanic isolators use diodes and capacitors to stop current flow.
ISO-BOOSTS® WITH SOFTSTART™ Charles Iso-Boost units combine all of the functions/features of an isolation transformer with a voltage sensing and switching circuit. The circuit provides the ability to automatically increase the line voltage on your boat. As well as completely isolating input power (shore) from output power (boat) protecting onboard systems and equipment, the Iso-Boost increases the boat’s voltage when it falls below a preset threshold due to low shoreline voltage.
SHOREBOOST™ PORTABLE AC POWER BOOSTER The Shoreboost monitors shore power and adapts it to maintain a safe operating voltage for your vessel’s AC power system. Used in tandem with a 50 Amp Isolation Transformer, the Shoreboost monitors shore power and when it detects a drop to or below 208VAC, it provides a 13% voltage boost to the AC system. If shore power increases to 223VAC, the unit will provide a 1:1 voltage ratio input to output.
A/B SELECTOR SWITCHES Function A/B Selectors automatically sense the location of the power source: port, starboard, fore or aft. The unit selects the AC connection and locks out a second power source. Units both electrically and mechanically lock out a secondary source. 9R units feature a fiberglass housing that does not need to be grounded.
PM3™ MODULAR AC POWER MANAGEMENT SYSTEM PM3 provides boat builders with greater freedom in managing onboard loads up to a maximum of 100 Amps (while connecting to two 240 volt 50 Amp shore power pedestals). Yacht owners gain the ability to operate the maximum rated amount of AC electrical equipment without the worry of exceeding load capacity. Provided shore-power is available, the PM3 will supply a minimum of 50 Amps, maximum of 100 Amps to the vessel’s main distribution point.
BOAT STANDS Charles boat stands are constructed from high-grade welded steel with a dark green powder coated finish to minimize corrosion and rusting. They are built in the USA to demanding specifications that ensure safety and ease of use. A wing nut design on a solid steel threaded rod allows tops to be raised or lowered quickly and easily. Side stands are stackable, and storage racks are available for both keel and side stands.
