User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
8-1
8. VOCALIZER (OPZIONALE)
If in your Megabeat Pro the optional VOCALIZER card is installed, you will be
able to enter a set of functions concerning harmonization and vocal
manipulation like:
! two or three voices vocal harmonization worked our from an appropriate
song track, or from a chord received via MIDI (through the MIDI IN
port);
! melody worked out from a solo line ( song track or messages received from
MIDI IN);
! effects: Vocoder, vocal timbre alteration (Male, Female, Child, Alien, ecc.).
The VOCALIZER has 2 working modes:
! SONG VOCALIZER (PLAY), active during the playing of a song.
! MANUAL VOCALIZER (STOP): active when no song is playing. This last
mode lets you use VOCALIZER as an indipendent unit (controlled via MIDI
through the MIDI IN port).
In the SONG VOCALIZER page you can set some parameters that are
associated to the selected song. In this way, for every song present in
MegabeatPro you can assign a VOCALIZER specific configuration.
Some function parameters are instead global and their modification affects
the VOCALIZER global features.
Note: The VOCALIZER affects only the audio signal coming from the MIC1-LINE1
input.
8.1 MIDI SETUP - VOCALIZER INPUT
The VOCALIZER INPUT parameter (present in the UTILITY/MIDI SETUP
menu) lets you choose the VOCALIZER working mode when a song is playing.
The available choices are:
! MANUAL+SONG: during PLAY the VOCALIZER will work with the settings
saved with the selected song.
! MANUAL: during PLAY the VOCALIZER will work only in manual mode,
that’s to say with just one working configuration.