User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
8-4
! FORMANT: alters the letter of the vocal modulation (through the so-called
“formant”).
! MIDI VELOCITY: with this function the VOCALIZER reacts to the velocity
of notes it receives.
"
ON: if you send a low velocity note, the VOCALIZER will output a low
level signal.
"
OFF: for any velocity of the notes sent, the VOCALIZER will output a
maximum level signal as it will ignore velocity (considering always
maximum value = 127).
! MIDI TRANSPOSE: lets you transpose MIDI notes with increments in
octaves. The produced signal will correspond to the notes received
transposed of the desired octave.
Note When the parameter is set to AUTO, the VOCALIZER transposes
dinamically the notes received to the octave nearest to the audio signal
in input.
The active function keys are:
! RESTOR: restores default parameters.
! SAVE: saves the set parameters associating them to the selected song.
! RELOAD: restores the last saved parameters.
! EXIT: exits from the page.
! CHECK: lets you pre-listen to VOCALIZER effect (with the set
parameters).
Note Once you enabled the pre-listen mode, the visualization of this function
key changes from: “CHECK” to “HEAR!”.
To disable the pre-listen mode just press HEAR!
! MANUAL: goes to configuration page in Manual mode.
8.3 MANUAL VOCALIZER (STOP)
This page sets the VOCALIZER working parameters in the manual mode.
The manual mode is enabled manually when no song is playing otherwise it can
be firced also during the playing of a song setting the VOCALIZER
INPUT=MANUAL parameter (in UTILITY menu, MIDI SETUP page).
NOTE