User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
8-7
! LEVEL: adjusts VOCALIZER output level (-∞ … 0 dB)
! STATUS: enables or disables VOCALIZER (ON/OFF)
Note
! The initial value (default) of LEVEL and STATUS parameters is the one
saved with the selected song.
! The modification of parameters made in this window will be lost when the
current song is finished.
8.6 How to set Vocalizer during COPY SONG
To make VOCALIZER setting phase easier, you can assign the SONG VOCALIZER
page parameters directly when you copy the songs in Megabeat Pro with the floppy
disk or through the direct transfer from Megabeat One .
To set these parameters in the UTILITY section you must go to SONGS COPY,
select the PARDEF function key, and then the VOCAL function key. At this
point you will see the “usual” page with VOCALIZER working parameters: the
settings made in this page will automatically be assigned to the songs entered
in Megabeat Pro. You will be able to modify later these settings following the
instructions described previously to shape the VOVALIZER working to the
selected song.
For further informations see the COPY SONGS chapter.