User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
3-1
3. GETTING STARTED
3.1 Turn the power on
Connect the included power adapter (input 12
VAC IN
) and press the ON button
located on the rear panel.
The display will light up and after a few seconds on the display you will see:
Don’t worry if after you turned the power on the display is lighted but no
message shows up. When you turn the power on some checks take place (Hard
Disk, internal memory, DSP, etc.), and they may last a minute.
3.2 Front Panel Tilting
To adjust Front panel Tilting you have to push the UNLOCK button located on
the rear panel.
It is possible to lock the panel in one of the four positions allowed.
1. If you keep the
UNLOCK
button (completely) pressed, turn the panel from
the rear side until you reach the desired position.
2. Release the
UNLOCK
button.
NB. Remember to always keep the panel lowered during transport of Megabeat Pro.
3.3 Display Contrast Adjustment
1. Press and keep pressed the
CONTRAST BUTTON
2. Keeping the button pressed, turn clockwise or counterclockwise the
PAGE
/
VALUE
knob, checking the change in contrast on the display
3. When you reach the desired contrast, release the CONTRAST button