User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
4-7
4.1.4 Adjusting Volume/Effects/Transpose/Tempo (ADJUST)
The ADJUST function is enabled through the ADJUST function key and lets
you adjust (globally or for each single track) the following parameters:
•
VOL
= VOLUME (global or single tracks volume)
•
TRN
= TRANSPOSE (global or single tracks transpose; no transpose affects
channel 10, which normally contains DRUM parts)
•
PRG
= PROGRAM CHANGE (single track program change)
•
BNK
= BANK (single track Bank Select)
•
REV
= REVERB (global or single track reverb send)
•
CHR
= CHORUS (global or single track chorus send)
•
PAN
= PANPOT (global or single track panpot)
•
CHN
=MIDI OUT (selects the MIDI Out output on which MIDI data are
sent: MIDI
OUT
1/MIDI
OUT
2/
OFF
; this parameter can be set globally or
for each single track and is active only if
PLAY MODE
=
USER
- see: par. 5.6.2
-
PLAY MODE
).
Starting from SINGLE PLAY mode, pressing ADJUST, on the display you will
see the following page (here displayed in
FULL MENU
mode):
In the lower half of the display you can see the parameter you can modify, in
this case
GLOBAL VOLUME
.
In the upper part you can see the parameter value on each MIDI channel (from
1 to 16).