User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
4-13
In other words, while the first Megabeat Pro sound generator is playing the
first song (and fades its volume with the desired fading time), the second
sound generators starts the second song.
4.2.1 LINK MODE Selection
Let’s see now how to select LINK MODE.
To select LINK MODE (in SINGLE PLAY mode) you must move with the
direction keys in the right section of the display as you can see in the picture,
and then highlight the parameter just under the
LINK MODE
words (in this case
“
MANUAL
”).
Using DIRECTION keys “∨
∨∨
∨“ o “∧
∧∧
∧“ move the LINK MODE
selection on a different value.
The underlying function key (that was non available before)
will display the CHANGE function (flashing). Pressing CHANGE
you will set a new LINK MODE mode.
If the new LINK MODE mode set requires the setting of a
specified parameter (for instance crossfade time) the
underlying function key will let you enable the EDIT function
(to set the corresponding parameter).
4.2.2 LINK MODE Options
Let’s now have a look to available LINK MODE options.
•
MANUAL
- manual mode: pressing the PLAY key the current song is stopped
and the new song starts immediately.
•
SYNTIME
– synchronized mode: pressing the PLAY key the current song is
played until the end of the current measure, then the new song starts.
•
JINGLE
1,
JINGLE
2,
JINGLE
3: non yet available on this software version.
•
CROSSF
1 – fast cross fade (Fast Crossfade): the current song fades out
slowly, and at the same time the second song fades in gradually replacing
the first one. The crossfade time that has been set (in seconds and tenths
of a second) can be changed through the EDIT function key and the
PAGE/VALUE knob.