User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
4-17
4.3.2 USER GRP
In the main page of GROUP PLAY mode the USER GRP is always active.
The USER GRP group is a special group created automatically by Megabeat Pro
using the list of the songs selected or played in SINGLE PLAY mode.
If in SINGLE PLAY mode you didn’t select or play any song, the USER GRP
group is empty.
If you are in SINGLE PLAY mode, you will be able to very easily verify that, if
after highlighting a song name with the DIRECTION keys, you press the
SELECT function key, on the left of the song name the number 01 appears.
Moving the cursor on another song and pressing SELECT once again, just beside
the second selected song the selection number 02 appears.
If you go on selecting songs from SINGLE PLAY pages, you obtain a list of
songs progressively numbered: 01, 02, 03, 04, …
To deselect a selected song, just move the cursor on it and press SELECT once
again. To delete all selections just hold the SELECT key pressed for a second.
The selected songs (numbered) are automatically entered in USER GRP group.
A second way to select a song is through the PLAY key. In fact, every time you
highlight a song with the cursor then press the PLAY key, the song is
automatically selected (beside you can see a progressive number that is the
selection number inside the USER GRP group).
The USER GRP group can be obviously saved in a new group (otherwise the
selections you made would be lost when you turn off the power) and edited.
This is the fastest way to create a group.
Attention!
Whatever you have in USER GRP is lost when you turn off the Megabeat Pro .
If you want to save the USER GRP group on Hard Disk, you must use the
GROUPS EDIT menu functions (in UTILITY mode).