User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-9
5.3 SONGS BACKUP (songs spare copy)
This function lets you save one or more songs. The backup copy can be made on
a floppy disk or on Hard Disk. Once you enabled this function, on the display
two function keys will be active:
FLOPPY
and
H
.
DISK
.
5.3.1 Backup on Floppy Disk
Pressing the FLOPPY function key you will be able to copy the selected songs on
floppy disk.
The display will show you the list of the songs contained on Megabeat Pro Hard
Disk. You will be able to select/deselect the desired songs through the
SELECT function key. The FD FREE parameter on the right of the display gives
you the free space on floppy disk as you select the songs (in the picture: FD
FREE = 011%). To start the operation press
COPY
, to exit
EXIT
.
If the total memory of the selected songs is greater than the space on floppy
disk, (FD FREE = 000%), during the copy an error message will be displayed
(DISK FULL) and it won’t be possible to copy all the selected songs.
So it’s important to keep always an eye on the FD FREE parameter, and in case
deselect the songs that let you not exceed the floppy disk capacity (and if
necessary go on with the backup operation with another floppy disk).
5.3.2 Backup on Hard Disk
Pressing the
H
.
DISK
function key you will be able to make a copy of the songs
on Hard Disk. The operation is similar to the floppy disk backup one with the
only difference that the songs are copied on the same Hard Disk they come
from. So at the end of the copy, Megabeat Pro prompts you to rename the
copied songs. Otherwise the saved songs will be present twice on Hard Disk.