User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-15
Viceversa choosing NO, the song will be kept in the group.
3. If you want to remove other songs from the group, repeat the operations
from point 1 to point 2.
4. Save the changes to the group with SAVE.
SAVE
Lets you save the changes you made to the group.
Once you pressed the SAVE function key, on the display you will see the
GROUPS RENAME page that lets you assign a name to the new group.
On the display you will see:
GROUPS RENAME
OLD NAME: “ group default name ”
NEW NAME: “ group default name ”
OK | INS>> | DEL<< | | EXIT
The initial choice of the new name (NEW NAME) is the same as the old name
(OLD NAME).
The cursor will highlight the first letter of the NEW NAME field: to change
the name of the group, turn the PAGE/VALUE knob clockwise (to increment
the selected letter) or counterclockwise (to decrement the selected letter).
Move then to the next letter with the right DIRECTION key.
To erase a letter from the old name use the
INS
>> or
DEL
<< function keys.
Once you’re finished with the group name editing, confirm with OK (to save the
modified name) or cancel the modification with EXIT, going back to the
GROUPS EDIT menu.
LINKMODE
This function lets you save link modes amongst MIDIfiles.
Pressing the function key “ LINKMOD” you go to the page with the following
parameters:
TITLE : xxxxx displays the selected song
LINK MODE : manual/syntime/crossfade/synfade/time morph/loop
The following line gives you a specific parameter, concerning the selected link
mode