User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-18
5.6 GLOBAL SETUP
This function lets you enter the global parameters of Megabeat Pro .
To enable GLOBAL SETUP function:
1. press the UTILITY key,
2. move the cursor on
GLOBAL SETUP
,
3. press
SELECT
.
On the display you will see the page:
♦ SAVE: saves the changes done in the GLOBAL SETUP page
♦ CHANGE: changes the value of the selected parameter.
♦ EXIT: lets you go back to UTILITY menu.
5.6.1 Pedal Polarity
To Megabeat Pro you can connect a pedal of any of the following types:
• normally open,
• normally closed.
Through the pedals you can give the following commands:
•
PLAY
(Pedal 1)
•
STOP
(Pedal 2)
If you use a “normally open” type pedal , the
PEDAL POLARITY
parameter must be
set =
TRIGGER
+.
Viceversa, using a “normally closed” type pedal, the
PEDAL POLARITY
parameter
must be set =
TRIGGER
-.
To change the
PEDAL
1
POLARITY
,
PEDAL
2
POLARITY
parameters: