User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-23
5.7.1 MIDI Clock Out
The available values are:
! DISABLED: from Megabeat Pro MIDI OUT 1 and 2 outputs the MIDI clock
message is not transmitted.
! ENABLED: during the playing of a song, from Megabeat Pro MIDI OUT 1
and 2 outputs the MIDI Clock message is transmitted. In this way you can
synchronize external devices such as sequencers or drum machines.
Note The Megabeat Pro is able to transmit MIDI Clock, but doesn’t recognise an
external MIDI Clock received via MIDI from other MIDI devices. This means
that, to synchronize the playing of a song on Megabeat Pro with the one of a
sequencer, the sequencer must be the “slave” and Megabeat Pro the “master”.
To change the MIDI CLOCK OUT parameter:
1. Enable the MIDI SETUP function (as described above).
2. Select MIDI CLOCK OUT parameter.
3. Press the CHANGE function key (every time you press the value will switch
between ENABLED and DISABLED), otherwise turn the PAGE/VALUE knob.
4. Save the changes with the SAVE function key.
5. Exit from MIDI SETUP mode with EXIT.
5.7.2 RESET TYPE
Before a song starts, from the MIDI OUT outputs you can send a reset
message, according to the value set for this parameter: GM/GS/XG/disabled.
To change the RESET TYPE parameter:
1. Enable MIDI SETUP function (as described above).
2. Select RESET TYPE parameter.
3. Press the CHANGE function key. Every time you press the value will switch
between GS RESET, GM RESET, XG RESET, DISABLED values.
4. Save the changes with the SAVE function key.
5. Exit from MIDI SETUP mode with EXIT.