User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-24
5.7.3 MIDI SONG SELECT
If this parameter is enabled and Megabeat Pro is in GROUP PLAY mode, any
MIDI Song Select messages will let you select a specific song inside the active
Group.
If the parameter is disabled (Filtered), the Song Select messages received via
MIDI will be ignored.
To change the MIDI SONG SELECT parameter:
6. Enable MIDI SETUP function (as described above).
7. Select MIDI SONG SELECT parameter.
8. Press the CHANGE function key. Every time you press the value will switch
between FILTERED and ENABLED values.
9. Save the changes with the SAVE function key.
1. Exit from MIDI SETUP mode with EXIT.
5.7.4 VOCALIZER INPUT
This parameter lets you select the mode with which the Vocalizer (optional) is
controlled. The available choices are:
! MANUAL: the notes on which the harmonization is made can be only
received via MIDI
! MANUAL + SONG: the notes on which the harmonization is made can be
received either via MIDI or read on a track specifically set inside the
active song.
To change the VOCALIZER INPUT parameter:
1. Enable MIDI SETUP function (as described above).
2. Select VOCALIZER INPUT parameter.
3. Press the CHANGE function key. Every time you press the value will switch
between:
! MANUAL
! MANUAL + SONG
4. Save the changes with the SAVE function key.
5. Exit from MIDI SETUP mode with EXIT.
(See also paragraph 8.1)