User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-25
5.7.5 LYRICS SYLLAB.
This parameter lets you select if on the display any lyrics saved in a syllabled
way in the MIDI File will be displayed in a syllabled way or not.
1. Enable MIDI SETUP function (as described above).
2. Select LYRICS SYLLAB parameter.
3. Press thr CHANGE function key. Every time you press the key the value
switches between:
! ENABLED (syllabation enabled)
! DISABLED (syllabation disabled)
4. Save the changes with the SAVE function key
5. Exit from MIDI SETUP mode with EXIT.
5.7.6 VOLUME TYPE.
This parameter lets you control the volume on an external expander via system
exclusive messages in standard GM or GS.
1. Enable MIDI SETUP function (as described above).
2. Select VOLUME TYPE parameter.
3. Press the CHANGE function key. Every time you press the key the value will
switch between:
! GS SYSEX
! GM SYSEX
4. Save the changes with the SAVE function key
5. Exit from the setting mode with EXIT.
5.7.7 SC88ST MODE
If a MIDI expander “Roland SC88” type is connected to Megabeat Pro MIDI
OUT outputs, you can decide if this device has to be controlled in SINGLE or
DOUBLE mode (to know the meanings of these Roland instrument operating
modes please refer to the Roland manual).
To change the SC88ST MODE parameter:
1. Enable MIDI SETUP function (as described above).
2. Select SC88ST MODE parameter.