User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-37
! With the PAGE/VALUE knob you can move the cursor back or forth
(represented by a vertical dotted line). The cursor moves automatically if
you go PLAY the audio file.
! POS is showing (hours:minutes:seconds) the current position of the cursor.
! SEL is showing the portion included between START and END.
! GAIN: is showing the gain applied on visualization on Y axis (waveform
visualization amplitude) see following number 4.
4. The direction keys act as “zoom” and let you zoom in or out in the
visualization window:
! ∧
∧∧
∧: the up arrow lets you increase the waveform amplitude on Y axis.
Pressing this key repeatedly, the GAIN indicator changes (by
intermediate steps) from –30dB to 0 dB.
! ∨
∨∨
∨: the down arrow narrows the waveforms on Y axis. Pressing this key
repeatedly, the GAIN indicator changes (by intermediate steps) from
0dB to –30dB range.
! >: the right arrow increases visualization on X axis. If you keep on
pressing this key, you obtain a zoom of the waveform on X axis.
At the same time the horizontal bar showed under the waveforms
narrows, to show the portion/position of the waveform showed on the
display, in relation to the total lenght of the audio file.
! <: the left arrow reduces visualization on X axis. If you keep on pressing
this key the waveform on X axis narrows.
At the same time, the horizontal bar showed under the waveforms
widens, until it becomes completely full (to show that the waveform
represented in the display equals the complete Audio file).