User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-38
The available function keys are:
! GOTO S: lets you take the cursor to the START point, marked with “S↓”
in the display.
! GOTO E: lets you take the cursor to the END point, marked with “↓E” in
the display.
! MRK S: pressing this key, you mark the START (S↓) point at the cursor
current position (vertical dotted line).
! MRK E: pressing this key, you mark the END (↓E) point point at the
cursor current position (vertical dotted line).
! EXIT: lets you go out from START/END CUT utility.
! PLYWIN: lets you listen to the waveform displayed on the current
window (if the visualization is reduced by the zoom function and in the
current window only a portion of the audio file is represented, using this
key only the portion of the file currently displayed will be heard)
Note In addition to the PLYWIN function, you can use the PLAY and STOP
transport keys to listen to the waveform (and move the cursor). Moreover,
the cursor can be placed with high precision using the PAGE/VALUE knob.
Using PLAY, instead of PLYWIN, the file will be played from the current
cursor position up to the MARK END (i.e. not only inside the currently
displayed window), if the cursor is beyond the Mark END the file will be
played until the end.
STEP MOVEMENTS WITH REW AND FWD KEYS
5. Using the visualization (“zoom”) functions and the waveform audio
monitoring, place the cursor on the positions on which you want to move the
file START and END points.
6. With the cursor stopped on the desired point, (file not playing), press MRK
S to mark the new START point.
7. Follow the same procedure to mark the END point and then press MRK E.
8. Exit from the editing window with the EXIT function key. The display will
show: