User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-42
5.14.1 How to create a lyric
The creation of a new lyric is very simple, just proceed as described
hereafter:
1. Enter LYRICS EDITOR function from UTILITY menu.
2. In the upper part of the display, the counters
LINE N.= 001 TOTAL LINES=001
Show respectively that you are working on the first line of the lyrics and
that currently the lyric contains just one line (totally).
Input any letter on the PC keyboard (connected to Megabeat Pro
KEYBOARD input).
If at this point you press the ENTER key on the keyboard (called otherwise
RETURN) you’ll finish the editing of the first line and you will go to the
second line..
You will see the counters will be increased as following:
LINE N.= 002 TOTAL LINES=002
To show that now you are working on the second lyrics line and that totally
the file now contains two lines.
In the display lower part, in the LIST OF LINES section, you will find the
list of the currently inserted lines, (in our case: LINE 001 is the first just
entered, LINE 002 is the second line that is still empty).
3. Go on entering words, including any punctuation mark, and change line as you
desire (with ENTER).