User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-46
line and press the CANC key, the editor will try to join the following line at
the end of the current line).
Note We used the term “will try” describing the operation of joining two lines
(available with BACKSPACE or CANC keys ) because this operation can be done
only if the line resulting from the “addition” is not greater than the maximum
number of letters that can be displayed on the three lines of Megabeat Pro
display (3 lines of 31 letters, spaces included).
4. Once you have finished with the editing, save the new file with the SAVE
function key, as described above.
Note Please note that, if you confirm the preceding name when the SONGS
RENAME function asks you to input a new name, on the hard disk you will have
two files with the same name.
5.14.4 How to erase a lyrics file
In the LYRICS EDITOR mode, the ERASE function key lets you erase lyrics
files that are present on Megabeat Pro hard disk.
Pressing the ERASE key, the ERASE LYRICS FILE page is displayed.
The files erasing operation is similar to the one we already saw for the SONGS
and the following function keys are available:
! SELECT: to select the file/s to be erased
! ERASE: to confirm erasing of files
! EXIT: if you press it before ERASE, you can exit without erasing any
selected file.
5.14.5 How to extract lyrics from a MIDIfile (.KAR)
Note The LYRICS extraction function from a MIDI file is currently available only
for the files saved in “.KAR” format. Following releases of the operating
system will enable you to extract lyrics also from other MIDI file types once
the Megabeat Pro can read them.
1. In LYRICS EDITOR mode press the EXTRACT function key, go with the
cursor to the desired file and press SELECT.
On the display you will see the list of the extracted lines and the text
corresponding to them.