User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-49
way the point where a specific LINE has been entered, you can use the STEP-
and STEP+ function keys.
1. To go to the modification function of the insert point of the text LINE,
after you went through point 7, paragraph 5.14.6 (instead of going on to
point 8, pressing SAVE), press the STOP key.
2. Now use the direction keys and the PAGE/VALUE knob to choose the
desired line. The text of the selected LINE will be showed on the display.
The display right section shows the measure and the bar corresponding to
the point where the selected LINE has been entered, for instance: 005:3
(viceversa, if the selected LINE has not been entered, instead of measure
and bar you will see some question mark: “???:??”).
Under the point where selected LINE insert bar is, you can see the symbol
“>”. This symbol shows the precise point where the line was entered inside
the bar and it can be placed with high precision in the bar using the STEP+ e
STEP- function keys.
3. Now press STEP+ o STEP- function keys. The symbol “>” can be moved
backward or forward in the bar, and at the same time the LINE insert point
will move backward or forward (inside the bar highlighted in the display
right side).
4. With the help of the pointer, place the LINE insert point as you desire.
5. To verify the precise point where you entered the text, follow the
suggestions of paragraph 5.14.7.
6. When you are finished with the insert, modification and verification
operations, save the MIDI File + Lyrics with the SAVE function key (as
described at point 8 paragraph 5.14.6).