User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-50
Note If using STEP- (o STEP+) you reach the beginning (or the end) of a bar, if you
press the function key once again you will move the selected LINE to the
previous bar (or the following).
A LINE can so be moved as you like backward or forward in the MIDI File,
until it reaches the insert point of the preceding (or following) LINE. When
you reach this point, if you go on pressing the STEP key, on the display you will
see the following message:
CANNOT MOVE LINE!!!
5.14.8 How to verify the insert point of a text line
Before you save the file with the SAVE function key, to be sure of the precise
synchronization lyrics/music, you can have a preview and display the associated
lyrics you just entered (or modified).
1. Using direction keys go to the desired line.
2. Press the PLAY key. The playing will start from the insert point of the
LINE preceding the one you selected.
3. If you press the STOP key one time and then you press the PLAY key, the
playing will resume exactly from the point where it was interrupted (like the
PLAY key act like a CONTINUE one). Viceversa, pressing the STOP key
twice in a row, next time you press the PLAY key, the song will resume from
the first measure.
4. Operate the desired modifications following every time the procedures
described in the preceding paragraph.
5. Verify the results repeating the preview procedure just described.
6. Save the “Song + Lyrics” with the SAVE function key.
Note Always remember that if during the lyrics saving procedure in the MIDI file
you press the REC function key once again or you press EXIT (and you didn’t
already save with SAVE), you will loose the LINE operations you made so far.
After you inserted the lyrics in an audio file, you will not be able to load the
song in the audio files editor (audio edit )