User manual

Megabeat Pro

Megabeat ProMegabeat Pro

Megabeat Pro

5-53

1. To enable H.DISK RECOVER function, from the DISK UTILITIES menu

select H.DISK RECOVER and press the SELECT function key. On the display

you will see:

H.DISK RECOVER

ARE YOU SURE?

YES NO

2. Press YES to start RECOVER procedure otherwise NO if you want to cancel

the operation.

3. Once you started the RECOVER procedure on the display you will see:

H.DISK RECOVER

000022

RECOVER IN PROGRESS

NOTE !!!

The solving of problems can take a long time (even some hour) as the whole disk

surface must be scanned, analyzing every present file. The operation will be as

long as the Hard Disk is full of data.

2. The progressive number shows the number of the song which is inserted in

alphabetical order and goes from 000000 to 12287 (maximum number of files

you can save on Hard Disk).

5.15.4 How to initialize the Hard Disk

This function lets you initialize the hard disk. This initialization (very much

alike the floppy disk formatting we saw before) erases all the data present on

hard disk, except the operating system (which is always present even after the

operation).