User manual

Megabeat Pro
Megabeat ProMegabeat Pro
Megabeat Pro
5-54
We suggest you to use this function only if serious problems occur for the
hard disk (problems that the H.D RECOVER function has not been able to
solve),
1. From the DISK UTILITIES menu select the CLEAR ALL DATA function and
press the SELECT function key: On the display you will see the following
message:
H.DISK FORMAT
WARNING !! #
FORMAT WILL CLEAR ALL YOUR DATA!
ARE YOU SURE?
YES NO
2. Press YES to start the formatting operation, NO to cancel the operation.
3. Before you proceed with the formatting operation Megabeat Pro asks you
once again to confirm the operation pressing the YES function key (NO to
cancel). During the formatting operation on the display you will see:
FORMAT IN PROGRESS
5.15.5 Mark Bad Clusters
The Megabeat Pro can make a Hard Disk scanning operation and mark these
sectors as damaged (bad clusters), so to prevent their use when saving files.
!!! ATTENTION: use this function only if Hard Disk saving errors occur: we
suggest the use of this function ONLY IN CASE OF ACTUAL
MALFUNCTIONS (error messages visualization on Megabeat Pro display).
!!! Before you start the operation we suggest you to do abackup copy of the files.
!!! ATTENZIONE: when the MARK BAD CLUSTERS operation is finished, the
files contained in the damaged clusters could be no more available!
1. From the DISK UTILITIES menu select the MARK BAD CLUSTERS
function and press the SELECT function key.
2. On the display you will see: