Safety Data Sheets (SDS)

ABS Pipe and Fittings
Date updated: 1/14/14
SAFETY DATA SHEET
Revision Date: 12/11/2013 Page 5 of 8
this product. If contact with dust or particulates is possible, the following should be worn unless the assessment indicates a
higher degree of protection: safety glasses with side shields. If adhesives or other substances are used with this product,
refer to the product manufacturer’s safety data sheet for applicable eye and face protective measures.
9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
Solid. Black.
ODOR:
Slight, sweet, aromatic.
ODOR THRESHOLD:
Not available
BOILING POINT:
Not available
FLASH POINT:
388-400°C (730-752°F)
FLAMMABILITY:
Melted product is flammable.
AUTOIGNITION TEMPERATURE:
495-510°C (923-950°F)
DECOMPOSITION TEMPERATURE:
Approximately 260°C (500°F)
LOWER/UPPER EXPLOSION LIMITS:
Not available
VAPOR PRESSURE:
Not available
LIQUID DENSITY:
Not available
SPECIFIC GRAVITY:
Approximately 1.05
MELTING POINT:
Not available
pH:
Not available
SOLUBILITY:
Insoluble
% VOLATILE:
Not available
VISCOSITY:
Not available
10. STABILITY AND REACTIVITY
Stability:
Stable at normal temperatures and pressures.
Reactivity:
Stable at normal temperatures and pressures.
Conditions to avoid:
Heat, flames, sparks and other sources of ignition.
Incompatible materials/conditions:
Consult the Charlotte Pipe and Foundry chemical resistance guide.
Hazardous decomposition products:
Hydrogen chloride, carbon oxides, small amounts of benzene and aromatic and
aliphatic hydrocarbons, phosgene.
Hazardous polymerization:
Not available.
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY: