SDS

PVC Pipe and Fittings
Date updated: 1/14/14
SAFETY DATA SHEET
Revision Date: 12/1/2013 Page 8 of 8
CFR:
Code of Federal Regulations
HEPA
High-Efficiency Particulate Air (filter)
IARC:
International Agency for Research on Cancer
LD50
Lethal dose to 50% of exposed laboratory animals
LC50
Lethal concentration to 50% of exposed laboratory animals
LEL:
Lower Explosive Limit
mg/l
Milligrams per liter
NIOSH:
National Institute for Occupational Safety and Health (US)
NTP:
National Toxicology Program
OSHA:
Occupational Safety and Health Administration (US)
PEL:
Permissible Exposure Limit
TSCA
Toxic Substances Control Act
TLV:
Threshold Limit Value – American Conference of Governmental Industrial Hygienists (ACGIH)
TWA:
Time Weighted Average
UEL:
Upper Explosive Limit
ug/ m
3
Micrograms per cubic meter
DISCLAIMER
NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, OR
WARRANTY OR GUARANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, IS MADE REGARDING
PERFORMANCE, SAFETY, SUITABILITY, STABILITY OR OTHERWISE FOR THE ABS MATERIALS AS
REPRESENTED IN THIS MSDS SHEET. Charlotte Pipe and Foundry assumes no liability whatsoever for the
use of or reliance upon this information. The information and data contained in this MSDS has been compiled
from information believed to be accurate and is offered for your consideration, investigation and verification.
Buyer assumes all risk of use, storage, handling and disposal of the product in compliance with applicable
federal, state, and local laws and regulations.