SDS

PVC Pipe and Fittings
Date updated: 1/14/14
SAFETY DATA SHEET
Revision Date: 12/1/2013 Page 1 of 8
1. PRODUCT AND COMPANY IDENTIFICATION
COMMON NAME:
PVC Pipe and Fittings
CHEMICAL NAME:
Not Applicable. Formulation, see section 3.
FORMULA:
Mixture
PRODUCT CAS NO.:
Mixture, see section 3.
Recommended Use:
Drain Waste Vent and Pressure Pipe and Fittings
SUPPLIER:
Charlotte Pipe and Foundry Company (Plastics Division)
ADDRESS:
4210 Old Charlotte Highway
CITY, STATE, ZIP:
Monroe, NC 28110
PHONE:
[phone] EMERGENCY PHONE: [phone]
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Toxic and irritating gases and fumes may be given off during burning or thermal decomposition. Avoid generating
dust. Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential
dust explosion hazard.
GHS Status
This material is hazardous in accordance with the hazard communication standard, 29 CFR
1910.1200
Classification of the
substance or mixture
Skin irritation – Category 2
Eye irritation – Category 2 A
Specific target organ toxicity – single exposure – Category 3
GHS label pictogram
Warning
Signal word
Warning
Hazard statements
Causes serious eye irritation.