Warranty

ManualsBrandsCharlotte Pipe and Foundry ManualsPVC Pipe & Fittings8" x 8" x 6" Reducing PVC Sanitary Tee DWV

General Information and Limited Warranty

We are pleased to present our catalog for use in ordering Charlotte

Pipe and Foundry Company

(Charlotte Pipe

) Products.

To determine current prices, please refer to the list prices shown

in this catalog. You may seek further clariﬁcation from our local

manufacturers’ agent or the factory sales ofﬁce.

All prices in this catalog and supplementary price schedules are

subject to change without notice. Orders will be billed at the

prevailing price at the time of shipment.

All quotations, sales, and agreements are subject to strikes, accidents,

transportation failures or other causes beyond our control.

Any tax, effective under present or future laws, shall be added as an

extra to the price of the product and shall be paid by the purchaser.

Possession of product information or price sheets shall not be

construed as an offer to sell the product listed.

Limited Warranty

Charlotte Pipe and Foundry Company

(Charlotte Pipe

) Products

are warranted to be free from manufacturing defects and to conform

to currently applicable ASTM standards for a period of ﬁve (5) years

from date of delivery. Buyer’s remedy for breach of this warranty is

limited to replacement of, or credit for, the defective product. This

warranty excludes any expense for removal or reinstallation of any

defective product and any other incidental, consequential, or punitive

damages. This limited warranty is the only warranty made by

seller and is expressly in lieu of all other warranties, express and

implied, including any warranties of merchantability and ﬁtness

for a particular purpose. No statement, conduct or description by

Charlotte Pipe or its representative, in addition to or beyond this

Limited Warranty, shall constitute a warranty. This Limited Warranty

may only be modiﬁed in writing signed by an ofﬁcer of Charlotte Pipe.

This Limited Warranty will not apply if:

1) The Products are used for purposes other than their intended

purpose as deﬁned by local plumbing and building codes, and

the applicable ASTM standard.

2) The Products are not installed in good and workmanlike manner

consistent with normal industry standards; installed in compliance

with the latest instructions published by Charlotte Pipe and

good plumbing practices; and installed in conformance with all

applicable plumbing, ﬁre and building code requirements.

3) This limited warranty does not apply when the products of

Charlotte Pipe are used with the products of other manufacturers

that do not meet the applicable ASTM or CISPI standards or

that are not marked in a manner to indicate the entity that

manufactured them.

4) The Products fail due to defects or deficiencies in design,

engineering, or installation of the piping system of which they

are a part.

5) The Products have been the subject of modiﬁcation; misuse;

misapplication; improper maintenance or repair; damage caused

by the fault or negligence of anyone other than Charlotte Pipe;

or any other act or event beyond the control of Charlotte Pipe.

6) The Products fail due to the freezing of water in the Products.

7) The Products fail due to contact with chemical agents, ﬁre

stopping materials, thread sealant, plasticized vinyl products,

or other aggressive chemical agents that are not compatible.

8) Pipe outlets, sound attenuation systems or other devices are

permanently attached to the surface of Charlotte

PVC, ABS

or CPVC products with solvent cement or adhesive glue.

Charlotte Pipe products are manufactured to the applicable ASTM

or CISPI standard. Charlotte Pipe and Foundry cannot accept

responsibility for the performance, dimensional accuracy, or

compatibility of pipe, ﬁttings, gaskets, or couplings not manufactured

or sold by Charlotte Pipe and Foundry.

Any Charlotte Pipe products alleged to be defective must be made

available to Charlotte Pipe at the following address for veriﬁcation,

inspection and determination of cause:

Charlotte Pipe and Foundry Company

Attention: Technical Services

2109 Randolph Road

Charlotte, North Carolina 28207

Purchaser must obtain a return materials authorization and

instructions for return shipment to Charlotte Pipe of any product

claimed defective or shipped in error. Please refer to the Return

Material Policy on the back of this page for speciﬁc instructions on

returning materials to Charlotte Pipe.

Any Charlotte Pipe product proved to be defective in manufacture will

be replaced F.O.B. point of original delivery, or credit will be issued,

at the discretion of Charlotte Pipe.

4/15/10

PO Box 35430 Charlotte, NC 28235 USA 704/348-6450 800/572-4199 FAX 800/553-1605

Literature-By-Fax 800/745-9382 www.charlottepipe.com

Charlotte Pipe and Charlotte are registered trademarks of Charlotte Pipe and Foundry Company.

Testing with or use of compressed air or gas in PVC / ABS

/ CPVC / Cast Iron pipe or fittings can result in explosive

failures and cause severe injury or death.

• NEVER test with or transport/store

compressed air or gas in PVC / ABS /

CPVC / Cast Iron pipe or fittings.

• NEVER test PVC / ABS / CPVC / Cast Iron

pipe or fittings with compressed air or

gas, or air over water boosters.

• ONLY use PVC / ABS / CPVC / Cast Iron

pipe or fittings for water or approved

chemicals.

• Refer to warnings in PPFA User Bulletin

4-80 and ASTM D 1785.

WA-GILW (6-18-13)

Summary of content (2 pages)

PAGE 1
General Information and Limited Warranty We are pleased to present our catalog for use in ordering Charlotte Pipe and Foundry Company® (Charlotte Pipe®) Products. 5) The Products have been the subject of modification; misuse; misapplication; improper maintenance or repair; damage caused by the fault or negligence of anyone other than Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe. 6) The Products fail due to the freezing of water in the Products.
PAGE 2
Return Material Policy Consistent with general industry practices, all products are shipped at the customer’s risk. Shipments should be carefully inspected before signing a receipt. A signed bill of lading or delivery receipts with no exceptions noted will indicate that the count, description and condition of products are satisfactory. Customer must obtain a Return Material Authorization (RMA) number and return instructions from Charlotte Pipe.