Technical Specifications

41
M
A
D
E
I
N
U
.
S
.
A
.
Nominal “ G” min. “ J” min. “ N” min.
Size (in.) in. (mm) in. (mm) in. (mm)
1
⁄2 0.382 (9.70) 0.183 (4.65) 0.102 (2.59)
3
⁄4 0.507 (12.88) 0.235 (5.97) 0.102 (2.59)
1 0.633 (16.08) 0.287 (7.29) 0.102 (2.59)
1
1
⁄4 0.758 (19.25) 0.339 (8.61) 0.102 (2.59)
1
1
⁄2 0.884 (22.45) 0.391 (9.93) 0.102 (2.59)
2 1.134 (28.83) 0.495 (12.57) 0.102 (2.59)
Minimum Dimensions From Center To End Of Socket
(Laying Length) For CPVC 41, SDR 11 Fittings
Nominal
Size
(in.) 73.4° F (23° C) 180° F (82° C)
1
⁄2 400 100
3
⁄4 400 100
1 400 100
1
1
⁄4 400 100
1
1
⁄2 400 100
2 400 100
Pressure Rating, PSI
Pressure Ratings For CPVC 4120, SDR 11 Plastic Pipe
1
⁄2 0.625 (15.9) ± 0.003 (± 0.08) 0.068 (1.73) + 0.020 (+ 0.51)
3
⁄4 0.875 (22.2) ± 0.003 (± 0.08) 0.080 (2.03) + 0.020 (+ 0.51)
1 1.125 (28.6) ± 0.003 (± 0.08) 0.102 (2.59) + 0.020 (+ 0.51)
1
1
⁄4 1.375 (34.9) ± 0.003 (± 0.08) 0.125 (3.18) + 0.020 (+ 0.51)
1
1
⁄2 1.625 (41.3) ± 0.004 (± 0.10) 0.148 (3.76) + 0.020 (+ 0.51)
2 2.125 (54.0) ± 0.004 (± 0.10) 0.193 (4.90) + 0.023 (+ 0.58)
Nominal
Size
(in.) Average Tolerance Minimum Tolerance
Outside Diameter, In. (mm) Wall Thickness, In. (mm)
Outside Diameters and Wall Thickness For CPVC 41, SDR 11 Plastic Pipe
Socket Length, Inside Diameter
In. (mm) In. (mm) Socket Entrance Socket Bottom
“ C” min. “ D” min. “ EA” min. “ EB” min. “ F”
Nominal
Size “ A ” “ A ” “ B ” “ B ”
(in.) Average Tolerance Average Tolerance
1
⁄2 0.633 (16.08) ± 0.003 (± 0.08) 0.619 (15.72) ± 0.003 (± 0.08)
3
⁄4 0.884 (22.45) ± 0.003 (± 0.08) 0.870 (22.10) ± 0.003 (± 0.08)
1 1.135 (28.83) ± 0.003 (± 0.08) 1.121 (28.47) ± 0.003 (± 0.08)
1
1
⁄4 1.386 (35.20) ± 0.003 (± 0.08) 1.372 (34.85) ± 0.003 (± 0.08)
1
1
⁄2 1.640 (41.66) ± 0.004 (± 0.10) 1.622 (41.20) ± 0.004 (± 0.10)
2 2.141 (54.38) ± 0.004 (± 0.10) 2.123 (53.92) ± 0.004 (± 0.10)
Socket Entrance Diameter, In. (mm) Socket Bottom Diameter, In. (mm)
Tapered Socket Dimensions For CPVC 41, SDR 11 Plastic Fittings
Wall Thickness, In. (mm)
0.500 (12.70) 0.489 (12.42) 0.068 (1.73) 0.102 (2.59) 0.128 (3.25)
0.700 (17.78) 0.715 (18.16) 0.080 (2.03) 0.102 (2.59) 0.128 (3.25)
0.900 (22.86) 0.921 (23.39) 0.102 (2.59) 0.102 (2.59) 0.128 (3.25)
1.100 (27.94) 1.125 (28.58) 0.125 (3.18) 0.125 (3.18) 0.156 (3.96)
1.300 (33.02) 1.329 (33.76) 0.148 (3.76) 0.148 (3.76) 0.185 (4.70)
1.700 (43.18) 1.739 (44.17) 0.193 (4.90) 0.193 (4.90) 0.241 (6.12)
ASTM D 2846
Standard Specifications
for
PIPE AND FITTINGS
for
HOT- AND COLD-WATER
DISTRIBUTION SYSTEMS
All information contained herein is
given in good faith without guarantee
of completeness or accuracy. If
additional information is needed,
please contact Charlotte Pipe and
Foundry Company.
PRODUCT DATA