Use And Care Manual

PVC and ABS DWV Fittings

Fitting Patterns

PVC and ABS DWV Fittings For Non-Pressure Applications

The following is a partial listing of Charlotte Pipe and Foundry

’

s product offering.

Please call (800) 438-6091 or visit www.charlottepipe.com for a complete list.

Female Adapter

Part No. PVC 101

•Has female threads on one end and the other end

adapts to the type of pipe being used.

•FPT x H

Pipe Increaser-Reducer

Part No. PVC 102

•Used to join two pipes of different diameters

together. For DWV applications, diameter cannot

be reduced downstream.

•H x H

Cleanout Adapter with Plug

Part No. PVC 105-X

•Used to seal off pipe, fittings and cleanouts.

•Spigot

Cap

Part No. PVC 116

•Used to seal off the end of a pipe.

•Socket

1/4 Bend, Street

Part No. PVC 302

•Used to turn the pipe 90 degrees.

•One end is spigot and the other end is hub.

•S x H

Long Sweep 1/4 Bend

Part No. PVC 304

•Used to turn pipe 90 degrees. Sometimes referred

to as a long radius elbow.

•H x H

Long Sweep 1/4 Bend Street

Part No. PVC 309

•Used to turn the pipe 90 degrees. Sometimes referred

to as a long radius elbow. One end is spigot and the

other end is hub.

•H x SPG

1/6 Bend

Part No. PVC 319

•Used to turn the pipe 60 degrees.

•H x H