Dimensions Guide

8
PVC Sewer Pipe
PVC SDR 35 PSM Pipe
SDR-35 GASKETED - PS 46
PART NO. NOM. SIZE UPC # QTY. PER LAYING WT. PER AVG. OD MIN. WALL
611942- SKID (FT.) LENGTH 100 FT. (LBS.) (IN.) (IN.)
S/M 6004G 4”x14’ 11920 840 14’-0” 110.4 4.215 .120
S/M 6004G 4”x20’ 04012 1200 20’-0” 109.7 4.215 .120
S/M 6006G 6”x14’ 11921 462 14’-0” 249.6 6.275 .180
S/M 6006G 6”x20’ 04016 660 20’-0” 247.0 6.275 .180
S/M 6008G 8”x14’ 11922 140 14’-0” 451.0 8.400 .240
ASTM D 3034 & ASTM F 477
Weight is approximate and is for shipping purposes only.
SDR-35 SOLVENT WELD - PS 46
S/M 6004 4”x10’ 04008 600 10’-0” 108.3 4.215 .120
S/M 6004 4”x20’ 04009 1200 20’-0” 108.3 4.215 .120
S/M 6006 6”x10’ 04013 330 10’-0” 241.7 6.275 .180
S/M 6006 6”x20’ 04014 660 20’-0” 241.7 6.275 .180
Weight is approximate and is for shipping purposes only.
Meets All Requirements of ASTM D 3034.
SDR 35 Gaskets meet or exceed ASTM F 477. Gasketed joints meet ASTM D 3212.
Pipe Data
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.
NOT FOR PRESSURE
Do not use PVC Sewer pipe for pressure applications. The
use of sewer pipe in pressure applications may result in
system failure and property damage.
PART NO. NOM. SIZE UPC # QTY. PER LAYING WT. PER AVG. OD MIN. WALL
611942- SKID (FT.) LENGTH 100 FT. (LBS.) (IN.) (IN.)