Dimensions Guide

6
PVC Foam Core Pipe
PVC Schedule 40 DWV Pipe
(For Non-Pressure Applications)
PVC SCHEDULE 40 FOAM CORE (WHITE) PLAIN END ASTM F 891
NOTE: When ordering, please specify plain end or
bell end.
PVC 4112 1
1
2
x 10 04178 1650 1.900 0.145 32.3
PVC 4112 1
1
2
x 20 04177 3300 1.900 0.145 32.3
PVC 4200 2 x 10 04174 1110 2.375 0.154 43.9
PVC 4200 2 x 20 04173 2220 2.375 0.154 43.9
PVC 4300 3 x 10 03934 1130 3.500 0.216 89.7
PVC 4300 3 x 20 03935 1000 3.500 0.216 89.7
PVC 4400 4 x 10 03936 670 4.500 0.237 123.8
PVC 4400 4 x 20 03937 1340 4.500 0.237 123.8
PVC 4600 6 x 10 03938 330 6.625 0.280 235.0
PVC 4600 6 x 20 03939 660 6.625 0.280 235.0
PVC 4800 8 x 20 03941 360 8.625 0.322 371.0
PVC 4910 10 x 20 03942 220 10.750 0.365 566.3
PVC 4912 12 x 20 03943 120 12.750 0.406 700.0
PVC 4300B
3 x 20 04782 1000 3.500 0.216 89.7
PVC 4400B
4 x 10 04783 670 4.500 0.237 123.8
PVC 4400B
4 x 20 04784 1340 4.500 0.237 123.8
PVC 4600B
6 x 10 09904 330 6.625 0.280 235.0
PVC 4600B
6 x 20 04786 660 6.625 0.280 235.0
PVC SCHEDULE 40 FOAM CORE (WHITE) BELL-END
Pipe Data
NSF Listed. Meets All Requirements of ASTM F 891.
NOT FOR PRESSURE
Do not use PVC / ABS / ABS Plus
®
cellular core (foam core)
pipe for pressure applications. The use of cellular core pipe
in pressure applications may result in system failure and
property damage.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
Refer to warnings on PPFA’s website and
ASTM D 1785.
MIN. WT. PER
PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT.
611942- SKID (FT.) (IN.) (IN.) (LBS.)
MIN. WT. PER
PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT.
611942- SKID (FT.) (IN.) (IN.) (LBS.)