Warranty Guide

28
Plastics Technical Manual
PVC 7100* 1
1
⁄4 ” x 10’ 03945 1.660 .140 42.4
PVC 7100* 1
1
⁄4 ” x 20’ 03946 1.660 .140 42.4
PVC 7112* 1
1
⁄2 ” x 10’ 03947 1.900 .145 51.8
PVC 7112* 1
1
⁄2 ” x 20’ 03948 1.900 .145 51.8
PVC 7200* 2 ” x 10’ 03949 2.375 .154 69.5
PVC 7200* 2 ” x 20’ 03950 2.375 .154 69.5
PVC 7300* 3 ” x 10’ 03951 3.500 .216 144.2
PVC 7300* 3 ” x 20’ 03952 3.500 .216 144.2
PVC 7400† 4 ” x 10’ 03953 4.500 .237 205.5
PVC 7400† 4 ” x 20’ 03954 4.500 .237 205.5
PVC 7500† 5 ” x 20’ 04837 5.563 .258 272.5
PVC 7600† 6 ” x 10’ 03955 6.625 .280 361.2
PVC 7600† 6 ” x 20’ 03956 6.625 .280 361.2
PVC 7800† 8 ” x 10’ 13087 8.625 .322 543.6
PVC 7800† 8 ” x 20’ 03958 8.625 .322 543.6
PVC 7910† 10 ” x 20’ 03959 10.750 .365 770.7
PVC 7912† 12 ” x 20’ 03961 12.750 .406 1019.0
PVC 7914† 14 ” x 20’ 04862 14.000 .437 1205.0
PVC 7916† 16 ” x 20’ 04918 16.000 .500 1575.7
* Dual Marked ASTM D 1785 & ASTM D 2665.
† Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480
NSF Listed. Meets All Requirements of ASTM D 1784, ASTM D 1785,
and ASTM D 2665.
PRODUCT DATA
>> PVC Schedule 40 DWV Pipe, Type 1, Grade 1
PVC Schedule 40 DWV Pipe
PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665
PART NO. NOM. SIZE UPC # AVG. OD (IN.) MIN. WALL (IN.) WT. PER
611942- 100 FT. (LBS.)
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.