Warranty Guide

9
CPVC Pressure
CPVC Schedule 80 Plain End Pipe (Corzan) ASTM D 1784 ASTM F 441
CPVC Schedule 80 Fittings (Corzan) ASTM D 1784 ASTM F 437 and ASTM F 439
CPVC CTS Tube and Fittings (FlowGuard Gold, ReUze
®
) ASTM D 1784 ASTM D 2846
PROPERTY CPVC 4120 UNITS ASTM No.
CPVC Standards
*Above data is based upon information provided by the raw material manufacturers. It should be used only as a
recommendation and not as a guarantee of performance.
TYPE PIPE / FITTINGS
STANDARD SPECIFICATIONS
MATERIAL DIMENSIONS
Specific Gravity 1.55 g/cc D 792
Tensile Strength (73°F) Minimum 7,000 psi D 638
Modulus of Elasticity in Tension (73°F) 360,000 psi D 638
Flexural Strength (73°F) 15,100 psi D 790
Izod Impact Cell Class 23447 (notched at 73°F) Minimum 1.5 ft lb/ in. of notch D 256
Izod Impact Cell Class 24448 (notched at 73°F) Minimum 5.0 ft lb/ in. of notch D 256
Hardness (Durometer D) — D 2240
Hardness (Rockwell R) 119 D 785
Compressive Strength (73°F) 10,100 psi D 695
Hydrostatic Design Stress 2,000 psi
Coefficient of Linear Expansion 3.4 x 10
-5
in./ in./ °F D 696
Heat Distortion Temperature at 264 psi Minimum 212 (Cell Class 23447) degrees F D 648
Heat Distortion Temperature at 264 psi Minimum 230 (Cell Class 24448) degrees F D 648
Coefficient of Thermal Conductivity .95 BTU/ hr/sq ft/ °F/ in. C 177
Specific Heat .34 BTU/ °F/lb D 2766
Water Absorption (24 hrs at 73°F) .03 % weight gain D 570
Cell Classification 23447 - 24448 D 1784
Burning Rate Self Extinguishing D 635
GENERAL INFORMATION
Physical Properties of FlowGuard Gold
®
, ReUze
®
& Corzan
®
CPVC Materials
*
Corzan and FlowGuard Gold are registered trademarks of Lubrizol Corp.