Measurement Guide

PO BOX 35430 CHARLOTTE, NORTH CAROLINA 28235
SALES PHONE [phone] [phone]
TECHNICAL PHONE [phone] FAX [phone]
WWW.CHARLOTTEPIPE.COM
PDS-PVC-40-PE-PIPE-720
Possession of this product data sheet shall not be construed as an offer to sell the products listed.
"You can't beat the system" is a registered trademark of Charlotte Pipe and Foundry Company.
©2019-2020 Charlotte Pipe and Foundry Company.
Product Data Sheet PVC-40-PE-PIPE-720
Effective July 23, 2020
Supersedes Product Data Sheet
PVC-40-PE-PIPE-1019
PVC Schedule 40 DWV
and Pressure Pipe
M
A
D
E
I
N
U
.
S
.
A
.
PVC 4005
1
⁄2”x10’ 06658 4500’ .840 .109 600 PSI 15.9
PVC 4005
1
⁄2”x20’ 03922 9000’ .840 .109 600 PSI 15.9
PVC 4007
3
⁄4”x10’ 06661 3500’ 1.050 .113 480 PSI 21.1
PVC 4007
3
⁄4”x20’ 03925 7000’ 1.050 .113 480 PSI 21.1
PVC 4010 1”x10’ 06664 3000’ 1.315 .133 450 PSI 31.3
PVC 4010 1”x20’ 03928 6000’ 1.315 .133 450 PSI 31.3
PVC 7100* 1
1
⁄4”x10’ 03945 2120’ 1.660 .140 370 PSI 42.4
PVC 7100* 1
1
⁄4”x20’ 03946 4240’ 1.660 .140 370 PSI 42.4
PVC 7112* 1
1
⁄2”x10’ 03947 1650’ 1.900 .145 330 PSI 51.8
PVC 7112* 1
1
⁄2”x20’ 03948 3300’ 1.900 .145 330 PSI 51.8
PVC 7200* 2”x10’ 03949 1110’ 2.375 .154 280 PSI 69.5
PVC 7200* 2”x20’ 03950 2220’ 2.375 .154 280 PSI 69.5
PVC 4025‡ 2
1
⁄2”x20’ 04205 1460’ 2.875 .203 300 PSI 110.0
PVC 7300* 3”x10’ 03951 1130’ 3.500 .216 260 PSI 144.2
PVC 7300* 3”x20’ 03952 1000’ 3.500 .216 260 PSI 144.2
PVC 7400† 4”x10’ 03953 670’ 4.500 .237 220 PSI 205.5
PVC 7400† 4”x20’ 03954 1340’ 4.500 .237 220 PSI 205.5
PVC 7500† 5”x20’ 04837 760’ 5.563 .258 190 PSI 272.5
PVC 7600† 6”x10’ 03955 330’ 6.625 .280 180 PSI 361.2
PVC 7600† 6”x20’ 03956 660’ 6.625 .280 180 PSI 361.2
PVC 7800† 8”x10’ 13087 180’ 8.625 .322 160 PSI 543.6
PVC 7800† 8”x20’ 03958 360’ 8.625 .322 160 PSI 543.6
PVC 7910† 10”x20’ 03959 220’ 10.750 .365 140 PSI 770.7
PVC 7912† 12”x20’ 03961 120’ 12.750 .406 130 PSI 1019.0
PVC 7914† 14”x20’ 04862 60’ 14.000 .437 130 PSI 1205.0
PVC 7916† 16”x20’ 04918 60’ 16.000 .500 130 PSI 1575.7
PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 1785
MAX WORK
PART NO. NOM. SIZE UPC # QTY. PER AVG. OD (IN.) MIN. WALL (IN.) PRESSURE WT. PER
611942- SKID AT 23° C OR 73° F 100 FT. (LBS.)
>> PVC Schedule 40 Pipe - Plain End
* Dual marked ASTM D 1785 and ASTM D 2665.
† Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480.
‡ Dual marked ASTM D 1785 and ASTM F 480.
NSF Listed. Meets All Requirements of ASTM D 1784 and ASTM D 1785.
All products manufactured by Charlotte Pipe and
Foundry Company are proudly made in the U.S.A.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS /
CPVC / Cast Iron pipe or fittings.
• NEVER test PVC / ABS / CPVC / Cast
Iron pipe or fittings with compressed
air or gas, or air over water boosters.
• ONLY use PVC / ABS / CPVC / Cast Iron
pipe or fittings for water or approved
chemicals.
• Refer to warnings on PPFA’s website
and ASTM D 1785.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC / Cast Iron pipe or fittings can result in explosive
failures and cause severe injury or death.