Use and Care Guide

Flash Point (Method Used) Flammable Limits LEL UEL
Extinguishing Media
Special Fire Fighting Procedures
Unusual Fire and Explosion Hazards
(Reproduce locally)
Other Limits
Hazardous Components (Specific Chemical Identity; Common Name(s)) OSHA PEL ACGIH TLV Recommended %
(optional)
IDENTITY
(As Used on Label and List) Note: Blank spaces are not permitted. If any item is not applicable, or no
information is available, the space must be marked to indicate that.
Material Safety Data Sheet U.S. Department of Labor
May be used to comply with Occupational Safety and Health Administration
OSHA's Hazard Communication Standard, (Non-Mandatory Form)
29 CFR 1910.1200. Standard must be Form Approved
consulted for specific requirements. OMB No. 1218-0072
Section IV - Fire and Explosion Hazard Data
Boiling Point Specific Gravity (H
2
O = 1)
Melting Point
Evaporation Rate
(Butyl Acetate = 1)
Section III - Physical/Chemical Characteristics
Section II - Hazard Ingredients/Identity Information
Manufacturer's Name Emergency Telephone Number
Address
(Number, Street, City, State, and ZIP Code)
Telephone Number for Information
Date Prepared
Signature of Preparer
(optional)
Section I
Solubility in Water
Appearance and Odor
Vapor Density (AIR = 1)
Vapor Pressure (mm Hg.)
PVC Pipe and Fittings
Charlotte Pipe and Foundry Co., Plastics Division
P.O. Box 1339
4210 Old Charlotte Hwy.
Monroe, N.C. 28111-1339
(800) 424-9300 (CHEMTREC)
(704) 372-3650
May, 2010
Less than 3.2 parts per million (ppm) of residual vinyl chloride monomer (rvcm)
Not Applicable Solid
Not Applicable Solid
Not Applicable Solid
Not Applicable
White, Grey or Green Solid - None
1.42 - 1.56
Processing Temperature 390
°F
Solid
Flash Ignition Temp (ASTM D 1929) ~735
°F Not Applicable N/A N/A
Evolves carbon monoxide, hydrogen chloride, and other toxic gases when burned.
Run off water from firefighting may have corrosive effects.
In confined spaces, self-contained breathing apparatus should be worn.
PVC is a combustible thermoplastic material.
Water spray, CO
2
Dry Chemical
MSDS-PVC (510)

Summary of content (2 pages)