How to Guide

127
ASTM D 2729 Specifications for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings “Sewer and Drain”
SCOPE : This specification covers requirements for (PVC) sewer pipe and fittings. The pipe and fittings in this
specification are designed for sewer and drainage applications outside the building.
ASTM D 2846 Specifications for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution System
SCOPE : This specification covers requirements for (CPVC) plastic hot and cold water distribution system components
made in one standard dimension ratio and intended for water service up to and including 180 degrees
fahrenheit.
ASTM D 2949 Specifications for 3.25-in. Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent
Pipe and Fittings
SCOPE : The requirements of this specification are intended to provide pipe and fittings suitable for drainage of
sewage and certain other liquid waste.
ASTM D 3034 Specifications for Type PMS Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings SDR 35
SCOPE : The requirements of this specification are intended to provide pipe and fittings suitable for non-pressure
drainage of sewage and other surface water.
ASTM D 3212 Specifications for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
SCOPE : This specification covers joints for plastic pipe systems through compression of an elastomeric seal or ring.
ASTM D 3311 Specification for Drain, Waste and Vent (DWV) Plastic Fitting Patterns
SCOPE : This specification provides standard fitting geometries and laying lengths for plastic fittings intended for
use in drain, waste, and vent applications.
ASTM D 3965 Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Material for Pipe and Fittings
SCOPE : This specification covers materials made from only virgin ABS polymers and blends of ABS polymers suitable
for use in the extrusion of pipe and molded fittings.
ASTM D 4396 Specifications for Rigid Poly (Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-pressure Piping
Products
SCOPE : The requirements of this specification are intended for the quality control of compounds used to manufacture
pipe and fittings intended for non-pressure use.
ASTM F 437 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fitting, Schedule 80
SCOPE : This specification covers CPVC threaded Schedule 80 fittings, intended for use with iron pipe size (IPS)
outside diameter plastic pipe.
ASTM F 439 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fitting, Schedule 80
SCOPE : This specification covers Schedule 80 CPVC fittings, intended for use with iron pipe size (IPS) outside
diameter plastic pipe.
ASTM F 441 Specifications for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedule 40 and Schedule 80
SCOPE : This specification covers CPVC pipe made in Schedule 80 sizes and pressure rated for water.
ASTM TITLE
HELPFUL REFERENCES
Reference Standards Plastics