How to Guide

39
PRODUCT DATA
PVC Sewer and Drain Pipe
Perforated pipe is supplied with two rows of 1/2” diameter holes every five inches. Rows are parallel to the pipe
axis and are 120° apart.
Weight is approximate and is for shipping purposes only.
NOTE: For truckloads of mixed sizes, multiply skids desired by truckload percent per skid.
Pipe listed in this section meets or exceeds the requirements of ASTM D 2729.
PVC 30030 3 ” x 10’ 10903 810’ 3.125 3.250 0.070 3.00 52.8 $ 110.00
PVC 30040 4 ” x 10’ 10905 500’ 3.125 4.215 0.075 3.50 70.4 $ 130.00
>> PVC ASTM D 2729 Pipe
SOLVENT WELD BELLED END ASTM D 2729
TRUCKLOAD
PART NO. NOM. SIZE UPC # QTY. PER PERCENT AVG. OD (IN.) MIN. WALL (IN.) BELL DEPTH WT. PER LIST PRICE
611942- SKID PER SKID (IN.) 100 FT. (LBS.) PER 100 FT.
PVC 30030P 3 ” x 10’ 11814 1040’ 4.160 3.250 0.070 3.00 52.8 $ 110.00
PVC 30040P 4 ” x 10’ 11815 500’ 3.125 4.215 0.075 3.50 70.4 $ 130.00
>> Perforated PVC ASTM D 2729 Pipe
SOLVENT WELD BELLED END ASTM D 2729
TRUCKLOAD
PART NO. NOM. SIZE UPC # QTY. PER PERCENT AVG. OD (IN.) MIN. WALL (IN.) BELL DEPTH WT. PER LIST PRICE
611942- SKID PER SKID (IN.) 100 FT. (LBS.) PER 100 FT.
NOT FOR PRESSURE
Do not use PVC Sewer pipe for pressure applications. The
use of sewer pipe in pressure applications may result in
system failure and property damage.
Perforation Detail
2-Hole 120 Degree
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.