Installation Guide

8
Plastics Technical Manual
 SpecicGravity g/cc 1.05 D792 1.40 D792
 TensileStrength(73°F)Minimum Psi 4,500 D638 7,000 D638
 ModulusofElasticityinTension(73°F)Minimum Psi 240,000 D638 400,000 D638
Flexural Strength (73°F) Psi 10,585 D 790 14,000 D 790
 IzodImpact(notchedat73°F)Minimum ftlb/in.ofnotch 6.00 D256 0.65 D256
 Hardness(DurometerD)  70 D2240 80±3 D2240
 Hardness(RockwellR)  100 D785 110-120 D785
Compressive Strength (73°F) Psi 7,000 D 695 9,600 D 695
 HydrostaticDesignStress Psi N/A  2,000 D1598
 CoefcientofLinearExpansion in./in./°F 5.5x10
-5
D 696 3.0 x 10
-5
D 696
 HeatDistortionTemperatureat264psiMinimum degreesF 180 D648 160 D648
 CoefcientofThermalConductivity BTU/hr/sqft/°F/in. 1.1 C177 1.2 C177
 SpecicHeat BTU/°F/lb 0.35 D2766 0.25 D2766
 WaterAbsorption(24hrsat73°F) %weightgain 0.40 D570 .05 D570
Cell Classification - Pipe 42222 D 3965 12454 D 1784
Cell Classification - Fittings 32222 D 3965 12454 D 1784
Burning Rate Self Ext. D 635
MATERIAL DIMENSIONS
PROPERTY UNITS ABS ASTM NO. PVC ASTM NO.
ABS and PVC Standards
*Above data is based upon information provided by the raw material manufacturers. It should be used only as a
recommendation and not as a guarantee of performance.
TYPE PIPE / FITTING
STANDARD SPECIFICATIONS
GENERAL INFORMATION
Physical Properties of Charlotte Pipe
®
ABS and PVC Materials
*
ABS DWV
 Schedule40DWVFoamCorePipe ASTMD3965 ASTMF628
 Schedule40DWVFittings ASTMD3965 ASTMD2661
ABS Plus
®
Schedule40DWVFoamCorePipe ASTMD3965&ASTMD4396 ASTMF1488
PVC DWV
 Schedule40DWVPipe ASTMD1784 ASTMD2665&ASTMD1785
 Schedule40DWVFoamCorePipe ASTMD4396 ASTMF891
 Schedule40DWVPipewithRecycledContent ASTMD4396 ASTMF1760
 Schedule40DWVFittings ASTMD1784 ASTMD2665
 FabricatedSchedule40DWVFittings ASTMD1784 ASTMF1866
PVC Pressure
 Schedule40PlainEndPipe ASTMD1784 ASTMD1785
 Schedule40BellEndPipe ASTMD1784 ASTMD1785
 Schedule40BellEndWellCasing ASTMD1784 ASTMD1785&ASTMF480
 SDR21(PR200)BellEndPipe ASTMD1784 ASTMD2241
 SDR26(PR160)BellEndPipe ASTMD1784 ASTMD2241
 Schedule40Fittings ASTMD1784 ASTMD2466
 Schedule80PlainEndPipe ASTMD1784 ASTMD1785
 Schedule80Fittings ASTMD1784 ASTMD2464&ASTMD2467