Dimensions Guide

PVC ASTM D 2729 Pipe

SOLVENT WELD BELLED END ASTM D 2729

PVC 30030 3” x 10’ 10903 810’ 3.250 0.070 3.00 52.8

PVC 30040 4” x 10’ 10905 500’ 4.215 0.075 3.50 70.4

PVC 30060 6” x 10’ 15149 330’ 6.275 0.100 4.00 129.0

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL BELL DEPTH WT. PER

611942- SKID (IN.) (IN.) (IN.) 100 FT. (LBS.)

PVC Sewer and Drain Pipe

Pipe Data

Perforated PVC ASTM D 2729 Pipe

SOLVENT WELD BELLED END ASTM D 2729

PVC 30030P

3” x 10’ 11814 1040’ 3.250 0.070 3.00 52.8

PVC 30040P

4” x 10’ 11815 500’ 4.215 0.075 3.50 70.4

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL BELL DEPTH WT. PER

611942- SKID (IN.) (IN.) (IN.) 100 FT. (LBS.)

Weight is approximate and is for shipping purposes only.

Pipe listed in this section meets or exceeds the requirements of ASTMD 2729.

All products manufactured by Charlotte Pipe and Foundry Company are proudly made

in the U.S.A.

NOT FOR PRESSURE

Do not use PVC Sewer pipe for pressure applications. The

use of sewer pipe in pressure applications may result in

system failure and property damage.

Failure to follow safety precautions may result in

misapplication or improper installation and testing which

can cause severe personal injury and / or property damage.

Primers and cements are extremely flammable and may

be explosive. Do not store or use near heat or open

flame, or death or serious injury may occur.

• Solvent fumes created during the joining process are

heavier than air and may be trapped in newly installed

piping systems.

• Ignition of the solvent vapors caused by spark or flame

may result in injury or death from explosion or fire.

• Read and obey all manufacturers' warnings and any

instructions pertaining to primers and cements.

• Provide adequate ventilation to reduce fire hazard and

to minimize inhalation of solvent vapors when working

with cements, primers and new piping systems.

Perforated pipe is supplied with two rows of 1/2” diameter holes every ﬁve inches.

Rows are parallel to the pipe axis and are 120° apart.