How to Guide
81
ASTM D 2729 4QFDJmDBUJPOTGPS1PMZ7JOZM$IMPSJEF17$4FXFS1JQFBOE'JUUJOHTi4FXFSBOE%SBJOw
SCOPE
: This specification covers requirements for (PVC) sewer pipe and fittings. The pipe and fittings in this
specification are designed for sewer and drainage applications outside the building.
ASTM D 2846 4QFDJmDBUJPOTGPS$IMPSJOBUFE1PMZ7JOZM$IMPSJEF$17$1MBTUJD)PUBOE$PME8BUFS%JTUSJCVUJPO4ZTUFN
SCOPE
: This specification covers requirements for (CPVC) plastic hot and cold water distribution system components
made in one standard dimension ratio and intended for water service up to and including 180 degrees
fahrenheit.
ASTM D 2949 4QFDJmDBUJPOTGPSJO0VUTJEF%JBNFUFS1PMZ7JOZM$IMPSJEF17$1MBTUJD%SBJO8BTUFBOE7FOU
Pipe and Fittings
SCOPE
: The requirements of this specification are intended to provide pipe and fittings suitable for drainage of
sewage and certain other liquid waste.
ASTM D 3034 4QFDJmDBUJPOTGPS5ZQF1.41PMZ7JOZM$IMPSJEF17$4FXFS1JQFBOE'JUUJOHT4%3
SCOPE
: The requirements of this specification are intended to provide pipe and fittings suitable for non-pressure
drainage of sewage and other surface water.
ASTM D 3212 4QFDJmDBUJPOTGPS+PJOUTGPS%SBJOBOE4FXFS1MBTUJD1JQFT6TJOH'MFYJCMF&MBTUPNFSJD4FBMT
SCOPE
: This specification covers joints for plastic pipe systems through compression of an elastomeric seal or ring.
ASTM D 3311 4QFDJmDBUJPOGPS%SBJO8BTUFBOE7FOU%871MBTUJD'JUUJOH1BUUFSOT
SCOPE
: This specification provides standard fitting geometries and laying lengths for plastic fittings intended for
use in drain, waste, and vent applications.
ASTM D 3965 4QFDJmDBUJPOTGPS3JHJE"DSZMPOJUSJMF#VUBEJFOF4UZSFOF"#4.BUFSJBMGPS1JQFBOE'JUUJOHT
SCOPE
: This specification covers materials made from only virgin ABS polymers and blends of ABS polymers suitable
for use in the extrusion of pipe and molded fittings.
ASTM D 4396 4QFDJmDBUJPOTGPS3JHJE1PMZ7JOZM$IMPSJEF17$BOE3FMBUFE1MBTUJD$PNQPVOETGPS/POQSFTTVSF1JQJOH
Products
SCOPE
: The requirements of this specification are intended for the quality control of compounds used to manufacture
pipe and fittings intended for non-pressure use.
ASTM F 437 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fitting, Schedule 80
SCOPE
5IJTTQFDJmDBUJPODPWFST$17$UISFBEFE4DIFEVMFmUUJOHTJOUFOEFEGPSVTFXJUIJSPOQJQFTJ[F*14
outside diameter plastic pipe.
ASTM F 439 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fitting, Schedule 80
SCOPE
5IJTTQFDJmDBUJPODPWFST4DIFEVMF$17$mUUJOHTJOUFOEFE GPSVTFXJUIJSPOQJQFTJ[F*14PVUTJEF
diameter plastic pipe.
ASTM F 441 Specifications for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedule 40 and Schedule 80
SCOPE
5IJTTQFDJmDBUJPODPWFST$17$QJQFNBEFJO4DIFEVMFTJ[FTBOEQSFTTVSFSBUFEGPSXBUFS
ASTM TITLE
DESIGN & ENGINEERING DATA
Reference Standards Plastics