How to Guide
29
PVC 4005
1
⁄2
”
x 10’ 06658 .840 .109 600 PSI 15.9
PVC 4005
1
⁄2
”
x 20’ 03922 .840 .109 600 PSI 15.9
PVC 4007
3
⁄4
”
x 10’ 06661 1.050 .113 480 PSI 21.1
PVC 4007
3
⁄4
”
x 20’ 03925 1.050 .113 480 PSI 21.1
PVC 4010 1
”
x 10’ 06664 1.315 .133 450 PSI 31.3
PVC 4010 1
”
x 20’ 03928 1.315 .133 450 PSI 31.3
PVC 7100* 1
1
⁄4
”
x 10’ 03945 1.660 .140 370 PSI 42.4
PVC 7100* 1
1
⁄4
”
x 20’ 03946 1.660 .140 370 PSI 42.4
PVC 7112* 1
1
⁄2
”
x 10’ 03947 1.900 .145 330 PSI 51.8
PVC 7112* 1
1
⁄2
”
x 20’ 03948 1.900 .145 330 PSI 51.8
PVC 7200* 2
”
x 10’ 03949 2.375 .154 280 PSI 69.5
PVC 7200* 2
”
x 20’ 03950 2.375 .154 280 PSI 69.5
PVC 4025‡ 2
1
⁄2
”
x 20’ 04205 2.875 .203 300 PSI 110.0
PVC 7300* 3
”
x 10’ 03951 3.500 .216 260 PSI 144.2
PVC 7300* 3
”
x 20’ 03952 3.500 .216 260 PSI 144.2
PVC 7400† 4
”
x 10’ 03953 4.500 .237 220 PSI 205.5
PVC 7400† 4
”
x 20’ 03954 4.500 .237 220 PSI 205.5
PVC 7500† 5
”
x 20’ 04837 5.563 .258 190 PSI 272.5
PVC 7600† 6
”
x 10’ 03955 6.625 .280 180 PSI 361.2
PVC 7600† 6
”
x 20’ 03956 6.625 .280 180 PSI 361.2
PVC 7800† 8
”
x 10’ 13087 8.625 .322 160 PSI 543.6
PVC 7800† 8
”
x 20’ 03958 8.625 .322 160 PSI 543.6
PVC 7910† 10
”
x 20’ 03959 10.750 .365 140 PSI 770.7
PVC 7912† 12
”
x 20’ 03961 12.750 .406 130 PSI 1019.0
PVC 7914† 14
”
x 20’ 04862 14.000 .437 130 PSI 1205.0
PVC 7916† 16
”
x 20’ 04918 16.000 .500 130 PSI 1575.7
PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 1785
MAX WORK
PART NO. NOM. SIZE UPC # AVG. OD (IN.) MIN. WALL (IN.) PRESSURE WT. PER
611942- AT 23° C OR 73° F 100 FT. (LBS.)
>> PVC Schedule 40 Pipe, Type 1, Grade 1 - Plain End
PVC Pipe: Schedule 40
* Dual Marked ASTM D 1785 and ASTM D 2665.
† Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480.
‡ Dual Marked ASTM D 1785 & ASTM F 480.
NOTE: When ordering, please specify plain end or bell end.
NSF Listed. Meets All Requirements of ASTM D 1784 and ASTM D 1785.
PRODUCT DATA
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.