Dimensions Guide

3
P
V
C
S
C
H
E
D
U
L
E
8
0
P
I
P
E
Pipe Data
PVC 10002
1
⁄ 4 ” x 20’ 04920 15140’ 0.540 .119 1130 PSI 10.0
PVC 10003
3
⁄ 8 ” x 20’ 04917 9360’ 0.675 .126 920 PSI 13.8
PVC 10005
1
⁄ 2 ” x 20’ 03968 6880’ 0.840 .147 850 PSI 20.3
PVC 10007
3
⁄ 4 ” x 20’ 03969 4200’ 1.050 .154 690 PSI 27.5
PVC 10010 1” x 20’ 03970 3540’ 1.315 .179 630 PSI 40.5
PVC 10012 1
1
⁄ 4 ” x 20’ 03973 4240’ 1.660 .191 520 PSI 55.9
PVC 10015 1
1
⁄ 2 ” x 20’ 03976 3300’ 1.900 .200 470 PSI 67.7
PVC 10020 2” x 20’ 03977 1980’ 2.375 .218 400 PSI 93.6
PVC 10025 2
1
⁄ 2 ” x 20’ 03978 1360’ 2.875 .276 420 PSI 142.8
PVC 10030 3” x 20’ 03979 1000’ 3.500 .300 370 PSI 194.2
PVC 10040 4” x 20’ 03980 1140’ 4.500 .337 320 PSI 279.3
PVC 10050 5” x 20’ 04831 760’ 5.563 .375 290 PSI 387.3
PVC 10060 6” x 20’ 03981 520’ 6.625 .432 280 PSI 532.7
PVC 10080 8” x 20’ 04175 300’ 8.625 .500 250 PSI 808.9
PVC 10100 10” x 20’ 04768 160’ 10.750 .593 230 PSI 1199.3
PVC 10120 12” x 20’ 04770 120’ 12.750 .687 230 PSI 1650.1
PVC 10140 14” x 20’ 04816 60’ 14.000 .750 220 PSI 1930.0
PVC 10160 16” x 20’ 04919 60’ 16.000 .843 220 PSI 2544.1
PVC Schedule 80 Pipe, Type 1, Grade 1 - Plain End
PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665
PVC SCHEDULE 80 (GRAY) PLAIN END PVC 1120
MAX WORK
PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL PRESSURE AT WT. PER
611942- SKID (IN.) (IN.) 23° C OR 73° F 100 FT. (LBS.)
M
A
D
E
I
N
U
.
S
.
A
.
Note: Full pallets are polyethylene wrapped for cleanliness and UV protection.
NSF Listed. Meets All Requirements of ASTM D 1784 and ASTM D 1785.
PVC Schedule 80 Pipe
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings on PPFA’s website and
ASTM D 1785.